+ 90 236 742 50 10

Organize Sanayi Bölgesi 305 Sokak No:11 Salihli Manisa / Turkey


FEEDTECH crumbling machines crumble feed in pellet form with minimum powdering. FEEDTECH crumbler is based on two large, independently driven rollers. Crumblers are designed to gain an optimum result with minimum fines but maximum crumble. Large-scale axially and radially riffled crumble rollers rotate at equal speeds in opposite directions, and cut the pellet to a crumble. An integrated rotating feeder made out of solid steel ensures an even distribution of the pellets to the crumble rollers.

Granules particle size is adjusted by changing the distance between rolls. Firm, low maintenance cost and easy to clean machines are produced in different sizes, powers and capacities on demand.

Suitable for:

FEEDTECH crumblers are suitable for all kinds of animal feed pellets to be crumbled to desired size.

does it work?

There is a springed roll protection system against impure materials. Large crumbling rollers with axial and radial grooves rotate at different slow paces and directions, thus crush the pellets into crumbs without powdering.

An integrated control valve ensures an even flow to an axially riffled proportioning roller, manufactured from solid steel. The accurate remote measurement is suggested for adjusting the distance between the large 300 mm crumble rollers to get an optimum result. Automatic roller adjustment also increases the efficiency and simplifies the adjustment of the roller during production.


► Higher Performance
► Hygienic Design
► Lower Energy Consumption
► More capacity with same energy level
► Frequency controlled dual rotation feeder (by-pass function)
► Disk springs
► Rollers are exchangeable from front and the side
► 50% more revision options of the rollers
► Easy maintenance access


► Manually or electro-pneumatically operated by-pass valve
► Manual or automatic feed valve
► Solid steel feed with axial grooves
► Housing manufactured from mild steel
► Two solid 300 mm axially and radially riffled crumble rollers from chrome steel of hartguss
► Steel or chilled cast iron
► Separately driven rollers at different paces
► Transmission via V belts
► Accurate crumble size setting
► Manual or automatic roller setting
► Analogue read-outs accurate to 0,1 mm
► Protected against impure materials by disk springs
► Leak-proof sealed shaft bearings outside the housing
► Control hatch with safety key
► Level indication included

Types of Crumblers

The most preferred 11 types of Crumblers designed and manufactured by FEEDTECH, are available in two groups (HB-KRU & HBT-KRU) with variable levels of motor power, capacity, weight and changing dimensions. You may have particular preference or requirements that will be considered and appreciated by FEEDTECH Engineering Team.